Car Won't Start, What's The Cause

Car Won't Start

We’ve compiled a shortlist of the most common reasons that your car is not starting. If you are having engine problems, these are the first places you should look!

1. Dead Battery

A dead battery is the most common reason why engines fail to start up. A common reason for batteries to fail is drain. Your car’s battery typically expends a small portion of its storage to start your car up, and then recharges from your alternator as you move. Problems begin when a light or another electrical application is left on when the car is off, which can drain the battery’s power and take the power required for a start-up. Other times, your battery can simply fail, without any of the issues mentioned before.

You’ll know this is your problem if you try to start the car and your engine remains silent – if your engine doesn’t even begin to start, then it is most likely an electrical problem. For a quick fix, you can try jump starting your battery, but real battery failure requires prompt replacement.

2. Clogged Fuel Filter

Another common issue that creeps up on older cars is a clogged fuel filter. Your fuel filter takes particulate matter out of your fuel before it enters your engine, so as to improve your performance. However, in older cars, the particulate matter can build up and cause trouble for your engine – fuel won’t make it through the fuel line to our engine, which won’t allow your engine to start.

If your fuel filter is clogged, your engine won’t get enough fuel for it to run. If this is the reason why your car isn’t starting, you’ve probably experienced performance issues before this one. When you turn the key, you will hear the engine start to turn, but it won’t get enough fuel, so it will likely fail to turn over. Subsequent attempts will yield the same result. The solution is to change your fuel filter, a relatively inexpensive solution.

3. Ignition chamber failures

A common failure in older cars are ignition coils and spark plugs, in fact, this duo was the third most common repair done last year, especially on older cars. The ignition coils and spark plugs are what actually cause the ignition in your engine. Fuel and air is injected into the ignition chamber and your spark plugs cause the spark that makes them ignite, starting your car. If your spark plugs are degraded or malfunction completely, your car can fail to start.

If this is the issue, turning of the key will result in clicking but you will not hear the car trying to start up – it simply cannot, because the fuel is not being lit. In the case that your spark plugs are malfunctioning, rather than not working, you may hear one or two “puffs” from your car, but the engine will not turn over. The solution for this is to replace either your spark plugs, ignition coils, or both... which can set you back a few hundred dollars.

4. Starter Failure

This issue is, again, more common in older cars, but can manifest in newer models as well. Your starter consists of many different parts, but the most common for failure is the solenoid, which relays electric current to the starter motor. If you hear a fast clicking noise, but no other sounds, chances are that your solenoid has failed. Other issues can be the bearings or bushings that fail, causing your starter to fail.

If your starter has failed mechanically (one of the moving parts has broken), you will notice one particular sign: your headlights will be bright when your car is off, but dim when you try to start the engine. Starter failure is remedied by fixing the entire system, which can cost a few hundred dollars.

These are just starting places for diagnosing your car. Keep in mind that extreme conditions can exacerbate any of these issues – if your fuel filter is putting strain on your car, and it is an extra cold night, then the problem may be so bad your engine will not start. The best way to deal with these issues is to manage them proactively and recognize the signs.

If your car happens to not start, Fiix can perform an inspection and repair the issue same-day, no need for a tow truck! Call us at 647-361-4449 or book online at Fiix.io today!

Need help replacing your battery ?

We can replace your dead battery - right at your home or office!

Dealership price: $275
Pricing starts at: $245

*Fiix is now Wrench! You will be directed to Wrench.com to get a quote and book your service.

Related articles

How To Conserve And Save Gas

OBD II Trouble Code P0517: Battery Temperature Sensor Circuit High

Common Car Warning Lights and What They Mean

How to Jumpstart your Battery

5 Signs Of A Failing And Faulty Alternator

4 Signs Of A Failing Catalytic Converter

Need help replacing your battery ?

We can replace your dead battery - right at your home or office!

Dealership price: $275
Pricing starts at: $245

*Fiix is now Wrench! You will be directed to Wrench.com to get a quote and book your service.

Extend your car's life. Get car advice straight to your inbox.

Join 5000+ car owners and keep your car in its healthiest form.

More Related Articles

3 Signs Of A Failing Canister Purge Valve

3 Signs Of A Failing Canister Purge Valve

The canister purge valve, also commonly referred to as the purge valve, is an important component of your Evaporative Emission Control (EVAP) system. This system contains fuel vapors created in your fuel tank from escaping into the atmosphere by trapping them in a charcoal canister.

Read more

OBD II Trouble Code P0860 Gear Shift Communication Circuit

OBD II Trouble Code P0860 Gear Shift Communication Circuit

The P0860 code is a generic powertrain code related to the transmission, including pressure errors and sensor issues. This specific code generally arises when a fault with the gear shift module communication circuity is detected by the engine control module.

Read more

What Does It Mean When Your Engine Turns Over

What Does It Mean When Your Engine Turns Over

When your engine starts, your battery sends an electrical pulse to your spark plugs, which causes the initial ignition. This then drives your crankshaft, which allows your engine to start moving. This is what the term ‘turning over’ means - it refers to the movement of the crankshaft after the initial ignition.

Read more